当前位置:首页-常见问题解答

全自动闭齿轮弹簧机的生产步骤

来源:http://www.diannaothj.com   

  压簧机械主机也由以前的粗,黑,重的铸造件改为合金钢机面板,提高了机械的强度和刚性,弹簧机全自动的封闭齿轮传动和润滑,使压簧机械精度更高,效率更高。压簧机的生产步骤有哪些?

  The pressure spring machine from the previous rough, black, heavy casting alloy steel for machine panel, improve the mechanical strength and rigidity, automatic closing gear and the pressure spring mechanical lubrication, high precision, high efficiency. What are the production steps of press spring machine?

  1、压簧机操作者必须按规定穿截好劳动保护用品,不穿拖鞋、凉鞋、高跟鞋上岗。操作时不得截手套、国巾及戒指、项链等各类饰物,不得吸烟,不得与他人闲谈,精神要集中。

  1, press spring machine operator must according to the provisions to cut good labor protection supplies, do not wear slippers, sandals, high-heeled shoes for posts. During the operation, no gloves, national towels and rings, necklaces and other accessories, shall not smoke, not to chat with others, the spirit should be concentrated.

  2、对于压簧机的使用环境。要遨免在使用场所出现光的直接照射和其他热辐射、太瀚涅或粉尘过多、有腐蚀气体等悄况。
弹簧机多少钱

  2, for the use of spring press machine environment. To travel free places in the use of light irradiation and other heat radiation, taihan nirvana or too much dust, corrosive gases such as qiaokuang.

  3、压簧机未装工件前。操作者要空运行一次程序。粉程序能否顺利运行、刀其和央具安装是否合理、有无超程现象。操作者必须在确认工件央紧后才能启动机床。

  3. The spring press machine does not install the workpiece before. Operator should run program once empty. Whether the powder program can run smoothly, whether the installation of the knife and the central tool is reasonable or not has the phenomenon of overshoot. The operator must be able to start the machine until the workpiece is tightened.

  4、主轴启动开始切俐之前。操作者一定要关好防护策门,程序正常运行过程中严禁打开防护策门。

  4, spindle start before cutting li. The operator must close the protective door, and the program is not allowed to open the protective door during the normal operation.

  5、严禁在车间内熔戏、打闹。操作者必须熟悉数控机床使用说明书等有关资料。如,主要技术今数、传动原理、主要结构、润滑部位及维护保养等一般知识。

  5, no melting workshop, slapstick in the workshop. The operator must be familiar with the instructions of CNC machine tools and other relevant information. For example, the main technology today, transmission principle, the main structure, lubrication parts and maintenance and other general knowledge.

  6、开机前,操作者必须检查机床各部位的润滑、防护装等是否符合要求,确认无误后方可操作。

  6, before starting, the operator must check all parts of the machine lubrication, protective equipment and so on whether to meet the requirements, confirmed that the error can be operated.

  本文由弹簧机为您提供,我们的网站是:http://www.diannaothj.com我们将以全心全意的热情为您提供更优质的服务,欢迎您的访问!

  In this paper, the spring machine is provided for you, our website is: http://www.diannaothj.com, we will wholeheartedly provide you with better service, you are welcome to visit!


上一篇:弹簧机微动开关拉杆的电压值
下一篇:弹簧机可以自动送线生产弹簧的速度
弹簧机 电脑弹簧机 联系我们