当前位置:首页-常见问题解答

弹簧机可以自动送线生产弹簧的速度

来源:http://www.diannaothj.com   

  弹簧机开机时,送线架没工作灯显示,没鸣报时,检查送线架的开关是否处于闭合状态,进电源是否有电,电压是否是规定的电压值,保险管有没被烧毁;

  When the spring machine starts up, the wire feeder does not show the working light, does not chime the bell, checks whether the switch of the wire feed frame is in a closed state, whether the power supply is electric, whether the voltage is the specified voltage value, whether the safety tube has been burned or not;

  弹簧机可以自动送线生产弹簧,这是因为有自动送线架,送线架,有以下功能:送线同步,缠线报警,左右旋转,线架报警,断线报警,调速功能。

  Spring machine can automatically send production line of spring, this is because the automatic wire feeding shelf, wire feeding shelf, has the following functions: wire winding synchronization, alarm, rotation, line disconnection alarm, alarm, control function.
电脑弹簧机

  当数控弹簧机送线架处于有电状态,线架不转时,应检查送线架电机是否能运转,卸下皮带试电机,查看变频器有没报警,如果不是,就要及时更换变频器;

  When the wire feeder of the numerical control spring machine is in the power state, the wire rack motor can be checked when the wire rack is not turned, the motor of the belt test is unloaded, and the frequency converter has no alarm, if not, the converter must be replaced in time;

  当微动开关的拉杆拉到底时,线架没有停止运转, 弹簧机的显示频上也没有出现“线架故障”之类的字样,如果有就要检查微动开关盒里的拉杆是否与两头的感应器相接触,如果没有,就要调整为接触,或者是更换感应器。

  When the pull rod pull end micro switch, wire frame did not stop, spring machine display frequency did not appear "fault line" and so on, if there is to check whether the micro switch rod box with two sensors in contact, if not, it is necessary to adjust the contact, or replace the sensor.

  当线架没有同步送线功能时,就是自动送线功能,检查线架电路板中的继电器是否烧坏,如果继电器的工作灯一直亮,就需要更换;

  When the wire frame has no synchronous line feed function, it is the automatic wire feed function, check whether the relay in the circuit board is burned out, if the work lamp of the relay is always bright, it needs to be replaced;

  您的需求就是我们努力的方向,您的追求就是我们的追求,欢迎您的到来,我们一起进步,一起创新!

  Your demand is the direction of our efforts, your pursuit is our pursuit, welcome your arrival, we progress together, together with innovation!


上一篇:全自动闭齿轮弹簧机的生产步骤
下一篇:最后一页
弹簧机 电脑弹簧机 联系我们